Section 4.1 Cartesian Coordinates
¶When we model relationships with graphs, we use the Cartesian coordinate system. This section covers the basic vocabulary and ideas that come with the Cartesian coordinate system.
The Cartesian coordinate system identifies the location of every point in a plane. Basically, the system gives every point in a plane its own “address” in relation to a starting point. We'll use a street grid as an analogy. Here is a map with Carl's home at the center. The map also shows some nearby businesses. Assume each unit in the grid represents one city block.
If Carl has an out-of-town guest who asks him how to get to the restaurant, Carl could say:
“First go \(2\) blocks east, then go \(3\) blocks north.”
Carl uses two numbers to locate the restaurant. In the Cartesian coordinate system, these numbers are called coordinates and they are written as the ordered pair \((2,3)\text{.}\) The first coordinate, \(2\text{,}\) represents distance traveled from Carl's house to the east (or to the right horizontally on the graph). The second coordinate, \(3\text{,}\) represents distance to the north (up vertically on the graph).
Alternatively, to travel from Carl's home to the pet shop, he would go \(3\) blocks west, and then \(2\) blocks north.
In the Cartesian coordinate system, the positive directions are to the right horizontally and up vertically. The negative directions are to the left horizontally and down vertically. So the pet shop's Cartesian coordinates are \((-3,2)\text{.}\)
Remark 4.1.5
It's important to know that the order of Cartesian coordinates is (horizontal, vertical). This idea of communicating horizontal information before vertical information is consistent throughout most of mathematics.
Checkpoint 4.1.6
Use Figure 4.1.2 to answer the following questions.
Traditionally, the variable \(x\) represents numbers on the horizontal axis, so it is called the \(x\)-axis. The variable \(y\) represents numbers on the vertical axis, so it is called the \(y\)-axis. The axes meet at the point \((0,0)\text{,}\) which is called the origin. Every point in the plane is represented by an ordered pair, \((x,y)\text{.}\)
In a Cartesian coordinate system, the map of Carl's neighborhood would look like this:
Definition 4.1.8 Cartesian Coordinate System
A Cartesian coordinate system 2 en.wikipedia.org/wiki/Cartesian_coordinate_system is a coordinate system that specifies each point uniquely in a plane by a pair of numerical coordinates, which are the signed (positive/negative) distances to the point from two fixed perpendicular directed lines, measured in the same unit of length. Those two reference lines are called the horizontal axis and vertical axis, and the point where they meet is the origin. The horizontal and vertical axes are often called the \(x\)-axis and \(y\)-axis.
The plane based on the \(x\)-axis and \(y\)-axis is called a coordinate plane. The ordered pair used to locate a point is called the point's coordinates, which consists of an \(x\)-coordinate and a \(y\)-coordinate. For example, for the point \((1,2)\text{,}\) its \(x\)-coordinate is \(1\text{,}\) and its \(y\)-coordinate is \(2\text{.}\) The origin has coordinates \((0,0)\text{.}\)
A Cartesian coordinate system is divided into four quadrants, as shown in Figure 4.1.9. The quadrants are traditionally labeled with Roman numerals.
Example 4.1.10
On paper, sketch a Cartesian coordinate system with units, and then plot the following points: \((3,2),(-5,-1),(0,-3),(4,0)\text{.}\)
Subsection Exercises
Identifying Coordinates
Creating Sketches of Graphs
3
Sketch the points \((8,2)\text{,}\) \((5,5)\text{,}\) \((-3,0)\text{,}\) and \((2,-6)\) on a Cartesian plane.
4
Sketch the points \((1,-4)\text{,}\) \((-3,5)\text{,}\) \((0,4)\text{,}\) and \((-2,-6)\) on a Cartesian plane.
5
Sketch the points \((208,-50)\text{,}\) \((97,112)\text{,}\) \((-29,103)\text{,}\) and \((-80,-172)\) on a Cartesian plane.
6
Sketch the points \((110,38)\text{,}\) \((-205,52)\text{,}\) \((-52,125)\text{,}\) and \((-172,-80)\) on a Cartesian plane.
7
Sketch the points \((5.5,2.7)\text{,}\) \((-7.3,2.75)\text{,}\) \(\left(-\frac{10}{3},\frac{1}{2}\right)\text{,}\) and \(\left(-\frac{28}{5},-\frac{29}{4}\right)\) on a Cartesian plane.
8
Sketch the points \((1.9,-3.3)\text{,}\) \((-5.2,-8.11)\text{,}\) \(\left(\frac{7}{11},\frac{15}{2}\right)\text{,}\) and \(\left(-\frac{16}{3},\frac{19}{5}\right)\) on a Cartesian plane.
9
Sketch a Cartesian plane and shade the quadrants where the \(x\)-coordinate is negative.
10
Sketch a Cartesian plane and shade the quadrants where the \(y\)-coordinate is positive.
11
Sketch a Cartesian plane and shade the quadrants where the \(x\)-coordinate has the same sign as the \(y\)-coordinate.
12
Sketch a Cartesian plane and shade the quadrants where the \(x\)-coordinate and the \(y\)-coordinate have opposite signs.
Cartesian Plots in Context
13
This graph gives the minimum estimates of the wolf population in Washington from 2008 through 2015. (Source: http://wdfw.wa.gov/publications/01793/wdfw01793.pdf)
What are the Cartesian coordinates for the point representing the year 2010?
Between 2010 and 2011, the wolf population grew by wolves.
List at least three ordered pairs in the graph.
14
Here is a graph of the foreign-born US population (in millions) during Census years 1960 to 2010. (Source: http://www.pewhispanic.org/2015/09/28/chapter-5-u-s-foreign-born-population-trends/.)
What are the Cartesian coordinates for the point representing the year 1970?
Between 1970 and 1990, the US population that is foreign-born increased by million people.
List at least three ordered pairs in the graph.
Regions in the Cartesian Plane
15
The point \({\left(1,-10\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(4,2\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(-6,8\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(-10,-2\right)}\) is in Quadrant
I
II
III
IV
16
The point \({\left(4,4\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(-7,-10\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(4,-9\right)}\) is in Quadrant
I
II
III
IV
The point \({\left(-9,10\right)}\) is in Quadrant
I
II
III
IV
17
Assume the point \((x,y)\) if in Quadrant II, locate the following points:
The point \((-x,y)\) is in Quadrant
I
II
III
IV
The point \((x,-y)\) is in Quadrant
I
II
III
IV
The point \((-x,-y)\) is in Quadrant
I
II
III
IV
18
Assume the point \((x,y)\) if in Quadrant IV, locate the following points:
The point \((-x,y)\) is in Quadrant
I
II
III
IV
The point \((x,-y)\) is in Quadrant
I
II
III
IV
The point \((-x,-y)\) is in Quadrant
I
II
III
IV
19
Answer the following questions on the coordinate system:
For the point \((x,y)\text{,}\) if \(x>0 \text{ and } y>0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
For the point \((x,y)\text{,}\) if \(x>0 \text{ and } y\lt 0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
For the point \((x,y)\text{,}\) if \(x\lt 0 \text{ and } y\lt 0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
For the point \((x,y)\text{,}\) if \(x\lt 0 \text{ and } y>0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
For the point \((x,y)\text{,}\) if \(y=0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
For the point \((x,y)\text{,}\) if \(x=0\text{,}\) then the point is in/on
Quadrant I
Quadrant II
Quadrant III
Quadrant IV
the x-axis
the y-axis
Plotting Points and Choosing a Scale
20
What would be the difficulty with trying to plot \((12,4)\text{,}\) \((13,5)\text{,}\) and \((310,208)\) all on the same graph?
21
The points \((3,5)\text{,}\) \((5,6)\text{,}\) \((7,7)\text{,}\) and \((9,8)\) all lie on a straight line. What can go wrong if you make a plot of a Cartesion plane with these points marked, and you don’t have tick marks that are evenly spaced apart?